What are the steps for installing the door stopper for glass partition doors?

       Glass partitionThere are two ways to install the distance door stopper, one is to install it in the air, and the other is to install it on the wall or skirting board.cut offThe working method of distance door stopper is now mostly magnetic principle. How to install glass partition door and installation steps of partition door stopper.

1. First, we need to confirm with the owner how to install the door stopper, whether it is installed in the air or on the wall. Because this is a bathroom, the owner decided to install the door stopper directly on the floor tiles, leaving space behind the door for storage. The workers and the owner confirmed the specific installation location, and the workers' trainers measured the size, and how much space should be left behind the door, which must meet the owner's wishes.

2. The second step is to close the door to the required position to test whether the door suction function is reasonable and whether the distance of the door suction on the door is appropriate. Position the door, and after roughly positioning it, close the door and try to see whether the actual operation is reasonable, including whether the door suction is a little out or a little in, and what the specific angle of the door suction is.

3. After the final position is determined, position the door on the high-altitude floor tiles. Use a pencil to confirm the position of the door on the floor tiles. The worker draws a line on the ground with a pencil to confirm the final position of the door opening. The next step is to confirm the final installation position of the door stopper.

4. After the door is positioned, draw the positioning position of the door stopper. The worker marks the final position of the door stopper. The reason why it is necessary to position it twice, both the door and the door stopper, is for better placement. The two points are in a straight line, which is the best way to accurately identify the angle of the door stopper and the door opening.

5. The next thing is to use an electric drill to drill the installation hole for the door stopper at high altitude. The worker drilled holes in the floor tiles, and the tiles were installed firmly. This door stopper only needs to drill one hole.

6. Remove the door stopper fixing end. When installing the door stopper fixing end, tighten the screws below. The door stopper is divided into a fixing end and a door end. The fixing end needs to be screwed tight before installation, and then the attached internal angle wrench is used to tighten the whole thing to the height or wall.

7. Fix the door stopper in the air. It is a delicate job to use a small inner corner to screw the screws. After confirming the position, drilling holes, and disassembling, the next thing is to install the fixing end in the air. Use the small inner corner tool provided to tighten the screws under the fixing end, and the door stopper will be automatically installed.

8. Confirm the position of the door stopper at the door end. The door stopper on the door only needs to be tightened with screws. It is useless to just install the fixed end of the door stopper. The door stopper must also be installed well. The key is the positioning of the door end. The method is to close the door as far as possible, then find the correct position on the door, and tighten the door stopper at the door end with screws.

9. Fine-tune the angle of the door stopper and then tighten it completely. The last step of door stopper installation is to fine-tune and adjust the angle of the door stopper so that it fits the door stopper at the door end completely. Finally, tighten the screws completely.

Glasscut offAlthough the distance between door suction and door stopper is small, it is an indispensable part of home decoration. Every household needs to use door suction, which plays a significant role in fixing the open door and preventing the door from hitting the wall and shaking randomly. Therefore, although the door suction is small, its effect is great.cut offThe distance between the door and the door stopper has a great impact, but its installation should not be taken lightly, because after all, it is still a movable part. It must withstand the impact and pulling of the wooden door, as well as the stress of the wall and floor tiles that fix it. Other effects on the door must also be considered. Therefore, the installation quality of the door stopper is directly related to the safety of doors, walls, floors, floor tiles, and people.